Photon Mono X 3D printer review: The very best material printer we’ve tested under $1,000.

anycubic photon mono x review

“The fairly low-priced Photon Mono X 3D printer creates high-grade prints at a rapid clip”.

OUR DECISION

The Photon Mono X 3D printer is a lower-cost choice if the $3,499 Kind 3 is as well much for your spending plan. This resin-based printer is quick and also generated some premium printers, albeit with a couple of print failures in our testing.

We have actually seen the 3D printer market change over the past couple of years, with costs falling as well as the top quality of the prints improving. The AnyCubic Photon Mono X proceeds this outstanding trend by supplying SHANTY TOWN printing for $599. That’s not the most affordable cost we’ve seen for an SLA printer, however it’s most definitely an attractive one for a devicer that has as well as produces high-quality prints earned a place amongst the finest 3D printers we have actually evaluated.

As component of our AnyCubic Photon Mono X testimonial, we also checked the Anycubic Clean and also Remedy Plus equipment, a different tool that can clean the prints the Photon Mono X creates and heal them to harden the material with a series of UV lights.

ANYCUBIC Photon Mono X Resin 3D Printer

ANYCUBIC Photon Mono X Resin 3D Printer
4.4 5 0 1
ANYCUBIC Photon Mono X 3D printer comes with an 8.9inch 4K Monochrome LCD with an HD resolution of 3840 x 2400, reducing the layer printing time to 1s-2s, 4X faster than Photon. And the max print speed is 60mm/h, 3X faster than other resin 3d printers.
ANYCUBIC Photon Mono X 3D printer comes with an 8.9inch 4K Monochrome LCD with an HD resolution of 3840 x 2400, reducing the layer printing time to 1s-2s, 4X faster than Photon. And the max print speed is 60mm/h, 3X faster than other resin 3d printers.
4.4 rating
4.4/5
Total Score
Very good

Photon Mono X 3D printer evaluation: Price as well as availability

The Photon Mono X is available currently for $559 from Amazon.com. The Clean as well as Cure And also costs $249.99 from Amazon.com.

Photon Mono X 3D printer testimonial: Design

The Photon Mini X is a Stereolithography (RUN-DOWN NEIGHBORHOOD) 3D printer, which suggests it makes use of a source of light to turn a liquid resin solid. This strong product then sticks to the steel print bed, which is elevated, reduced, and also the procedure repeats, producing the print layer by layer.

It’s a bit extra intricate than the FDM (Molten Deposition Modeling) kind of 3D printer, which utilizes melted plastic to develop the layers, so SLA printers have normally been the extra costly alternative. (Our favorite SLA printer, the Kind 3 from Form Labs, sets you back $3,499.) Nonetheless, SLA printers generate more complicated prints with finer detail due to the fact that they create finer layers. The default layer height for the Photon Mono X is 0.01 mm, 10 times smaller than a typical FDM printer.

At 18 inches high as well as 11.4 inches vast, the Photon Mini X is a tiny printer for the size of prints it produces: It’s qualified of creating 9.6 x 7.5 x 4.6-inch prints an overall of 331 cubic inches. The majority of the quantity of the printer is the hood that fits over the printing area, made of transparent plastic that shows you the printing process, yet obstructs UV light from getting in or out.

Several SHANTY TOWN 3D printers use a laser to zap the material, yet the Photon Mono X goes an additional path, making use of a panel of ultraviolet (UV) LEDs with an LCD display over, right listed below the storage tank that holds the resin. This works like the backlight on your HDTV: the light lusters through the LCD screen where each pixel is transformed and obstructed where each is transformed off. The display has a 4K resolution (3840 by 2400 pixels), which implies that each pixel converts into a space of much less than 0.01 mm on the final print. The bottom of the material storage tank is a sheet of clear film made from a material called Fluorinated Ethylene Propylene (FEP) that lets with the UV light to solidify the material.

Both the fep and also the display movie need replacement after hefty usage, as the UV light problems them with time. AnyCubic insurance claims that the monochrome screen made use of in this version will last for thousands of hours of printing, while the FEP sheet requires to be changed every 20 to 30 prints.

The various other advantage of a monochrome screen is speed: while the color LCD screens that are used in the majority of SLA printers have 3 filters to allow through red, eco-friendly, as well as blue light, monochrome screens don’t have any kind of filters. That implies a lot more light survives, so the printing is quicker. AnyCubic cases a printing speed of 6 vertical centimeters (about 2.3 inches) per hour, and also we wouldn’t disagree: this is a fast printer.

The Clean And Cure Plus coincides shapes and size as the printer, with a similar design. As opposed to the print head, there is an arm covered in UV LEDs which bends at the end to cover the whole print. A removable vat for washing is also consisted of; it consists of a built-in agitator to mix the fluid.

anycubic photon mono x review

Photon Mono X 3D printer review: Publish process

The prints that the Mono X produces are set up in the Photon Workshop software program, readily available as a totally free download for Windows and also OSX. It’s a respectable if a little eccentric 3D slicer that permits you to load one or even more 3D models and established them up for printing. The designs can be moved, multiplied, and also scaled up as well as down, the conserved for printing. You can not develop brand-new designs in Photon Workshop.

The Photon Workshop can immediately add the supports, the tree-like structures that hold the print in location while it is being produced, as well as which are eliminated later. This didn’t show to be also effective, though: several of our print failings were brought on by incorrectly positioned assistances, and I located that I would normally do the automated supports, after that go through as well as by hand add even more to the position on the print that may have problems.

One intriguing function here is the ability to split models. Photon Workshop can separate it into pieces if a version is too big to print at when. Each piece is then printed in turn as well as stuck together. That’s a wonderful trick that would be excellent to see on other slicer apps.

There is additionally an Anycubic application readily available for Android and iphone that you can make use of to start a print or monitor print progress from your phone. You can not submit a print documents from this application, yet it is nice to have a method to see exactly how far a print has to go before it’s done. Also nicer would certainly be a camera to show you if the print is working effectively, however that isn’t existing on the Photon Mono Xr.

When the print is full, you make use of the Clean as well as Cure And Also to as the name suggests clean the print to get rid of any fluid resin as well as cure it to solidify the resin with UV light. You wash the print in isopropyl alcohol, which can be done either after you eliminate the print from the print bed or install the whole print bed onto one of two ports in a consisted of basket. This large container holds a whole lot of liquid up to 8.5 liters (2.25 gallons). You will not always need that much, but you will certainly require sufficient to cover the print entirely. At the minute isopropyl alcohol is not affordable, as it is just one of the cornerstones of hand sanitizer.

When the print is in location, you pick for how long you desire it to be cleaned for, after that push the control dial in to begin. The agitator mixes the liquid, transforming instructions every 2 mins to see to it that all of the fractures and also holes of the print are cleaned.

As soon as your print is washed, you get rid of the print and also let it completely dry. Afterwards, it is time to heal the print, which you do by changing the alcohol container on the Laundry and Cure Plus with a turning system. Once more, you use the control dial to select for how long to cure for: generally, this would be 2 to 5 minutes, depending on the size of the print.

The platform turns subjecting the print to the UV light from the LEDs on the arm that towers over the print once you start the procedure. The process will not begin till you replace the plastic cover, which blocks the UV light from appearing. That’s a great safety measure, as this strength of UV light can damage your eyes.

anycubic photon mono x review

Photon Mono X 3D printer review: Print rate

The Photon Mono X is a rapid printer: our 4-inch high Thinker examination version took 7 hrs and 35 minutes to print, which is dramatically faster than a lot of printers in this class. The Peopeoly Phenom, as an example, took simply over 13 hours to print the same design at the exact same dimension.

We generally print the Thinker version vertically to make it fair for printers that do not have sufficient space on the develop plate to print the Thinker relaxing horizontally. The Photon Mono X has plenty of print space huge sufficient to manage this, so we also examined this and found out that it was much, much quicker, taking simply 3 hours and also 56 minutes to publish here.

anycubic photon mono x review

Photon Mono X 3D printer review: Print high quality

I was impressed with the quality of the prints that the Photon Mono X generated. My prints had tidy, sharp sides and also smooth, organic curves as well as surface areas. We test utilizing 3 versions that evaluate the capability of the printer to replicate information: a scan of Rodin’s Thinker, a collection of global equipments, and also a geometric sculpture.

The Thinker sculpture was normally well reproduced, with great details and smooth, organic contours that resembled the genuine thing on the head as well as shoulders. The Geometric sculpture had sharp, tidy sides with good factors and exact interlocking surface areas. The Gears were quickly constructed as well as ran efficiently, although the grey material we tested with this printer created a great deal of dirt and residue (the white product) when we screwed the different parts of the gears together.

We did notice some problems on prints, though: occasionally, a few of the layers seemed ahead loose, resulting in loose flaps of resin. Look, for example, at the keg in the straight print of the Thinker: the internal calf bone of his ideal leg has a few layers that really did not stick to the ones above. One of the points of the geometric sculpture appears to be flattened since the layers were pressed down by the fluid resin as the print was produced.

A lot of these concerns can be corrected by tweaking the print, though: the loose layers as well as the squashed factor suggest that the print called for a few more sustains to hold it in location while printing, or that the object could be better published at a different angle.

All of this suggests something that is real of the majority of 3D printers: they still need a lot of tweaking to get the most effective top quality prints out of them, as well as much of this tweaking counts on functioning out why a print stopped working as well as trying once again.

anycubic photon mono x review

Photon Mono X 3D printer review: Decision

anycubic photon mono x review

The AnyCubic Photon Mono X breaks new ground, lowering the cost of SLA publishing to a brand-new low. It does so without making way too many concessions: printing stays a somewhat untidy business that periodically stops working, once you obtain made use of to the Photon Mono X (and buy a mask as well as a large box of disposable handwear covers), it is fast and usually problem-free.

RUN-DOWN NEIGHBORHOOD printing is absolutely still a process that calls for patience, however, as some prints from the Photon Mon X stopped working as well as call for alteration and re-printing. I would also suggest that you acquire the Clean as well as Treatment And Also, as it makes the instead icky company of cleaning as well as healing SLA prints a lot easier.

Combined, both cost less than $800 and also can produce big, top notch prints at a faster rate than the majority of the competitors. The Kind 3 continues to be the SLA printer to obtain for specialists who require to do a great deal of sturdy printing, yet the Photon Mono X is an outstanding choice for at-home work by hobbyists or those interested regarding 3D printing.

Pros

  • Large print size for low cost
  • Fast prints
  • High-quality prints

Cons

  • SLA printing is still a mess, stinky business
  • Slicing software produces inconsistent supports
  • Some print failures
Total
0
Shares
Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
best soundbars 2021

Finest soundbars to boost your TV’s sound

Next Post
razer basilisk v3 wireless

Razer Basilisk V3 evaluation

Related Posts

Sign Up for Our Newsletter